Filter
Top Products
117
Lock application
With this feature you can lock your applications which provide access to information
such as call records, phonebook, messages, images, and sounds. Once you lock the
contents, you must enter the phone’s password to access the associated menus.
1. Press the Up or Down Navigation key to select an item to lock
2. Press the key to place a check mark on the selected item.
• To lock all of the contents, select Lock all.
3. Highlight the previously selected item and press the key to remove a
check mark.
4. Press the Save soft key to lock the marked items.
5. Enter a password and press the OK soft key or the key.
Note: The password is preset to “00000000” at the factory. To change this password, see "Change
password" on page 116.
FDN mode
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict
your outgoing calls to a limited set of phone numbers.
The following options are available:
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in Phonebook. You must enter your
PIN2. You can obtain your PIN2 from T-Mobile’s customer service.
Change PIN2
The Change PIN2 feature allows you to change your current PIN2 to a new one. You
must first enter the current PIN2 (obtained from T-Mobile) before you can specify a
new one. Once you enter a new PIN2, you are asked to re-enter the new PIN2 to as
confirmation.
Note: Not all SIM cards have a PIN2. This menu does not display if your SIM card does not have the PIN2
feature.
Memory Status
You can check the amount of the memory being used and the memory remaining for
Shared memory, Messages, Files, Calendar, and Phonebook.
The display shows the total space including the used and free space. You can also
view how much space is currently occupied by each message box.
t409.book Page 117 Monday, July 23, 2007 3:58 PM