Samsung Siren Series Cell Phone User Manual


 
132
5.
Press to perform the function for the highlighted option.
Change Lock
The default lock code is generally the last four digits of your phone number. It is
advisable to change the default lock code to a secret code for security purposes.
1. In standby mode, press the MENU key ( ), then press (for
Settings), (for Phone Settings), and for Security.
The “Enter Code” prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone number.
The “Enter Code” prompt disappears and the Security menu appears in
the display.
3. Press for Change Lock. You’re prompted to enter the New Lock
Code.
4. Enter the New Lock Code. You’re prompted to re-enter the New Lock Code
for verification.
5. Enter the new lock code again. Your changes are stored.
Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the
lock code, be sure to write down or memorize the new code.
Emergency #
You have the option of storing up to three emergency numbers to your phone. Each
number can be up to 32 digits in length. All emergency numbers can be dialed any
time, even when your phone is locked or restricted.
Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even
when the phone is locked or restricted. If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Important!: Because of various transmission methods, network parameters, and user settings used to
complete a call from your wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling 911 or for essential or
emergency calls.
wxyz
jkl
def
abc