Filter
Top Products
96
Camera
Taking Pictures
Taking pictures with the built-in camera is as simple as choosing a subject, pointing
the lens [located on the outside of the folder (above the external display)], and
pressing a button.
Simple Snap Shot
To take a single picture using the current camera settings, do the following:
1. In standby mode, press and hold the camera key ( ) on the right side of
the phone.
The message “Loading...” followed by a camera viewfinder screen
appears in the display. (See “Camera Screen” on page 97 for more
information.)
Note: You can also activate the camera by pressing the Menu key ( ), then press (for
Multimedia) and for Camera.
2. Point the camera lens at your subject.
3. Using the display as a viewfinder, press the key or the camera key
( ) when the image that you wish to capture appears in the display.
4. Press the Save (left) soft key ( ) to save the picture to the Image gallery
in your phone, a part of the phone’s memory devoted to storing,
browsing, and viewing saved pictures
.
Press the Send key ( ) to save the picture and include it in a Picture
message. (See Send Picture Messages in Camera Mode for more
information.)
Press the Erase (right) soft key ( ) to erase the photo.
Tip: You can change a number of the camera’s settings to suit particular uses for your pictures. See
“Camera Shortcuts” on page 98 for more information.
ghi
@