Filter
Top Products
Voice SVC 93
Voice Settings
2. Use the navigation keys to highlight Reset Digits, then press the key.
The phone prompts you to confirm digit rest.
3. Press the OK (left) soft key ( ) to reset your digit adaptation, or press the
Back (right) soft key ( ) to cancel.
Sound
Sound lets you specify what (if any) text prompts you want your phone to read to you
through the earpiece.
1. In standby mode, press the MENU key ( ), then press (for Voice
SVC), (for Voice Settings), and for Sound. The following
options appear in the display:
•Prompts — On/Off — Enables or disables audio prompts.
• Digits — On/Off — Enables or disables digit playback.
•Names — On/Off — Enables or disables name playback.
• Name Settings — Lets you adjust the Speed (Faster or Slower) and Volume
(Louder or Softer) of your phone’s audio name playback.
2. Use the Up and Down navigation keys to highlight the desired option, then
press the key.
3. Use the Up and Down navigation keys to highlight the desired setting.
4. Press the key or the OK (left) soft key ( ) to accept the new setting.
Press the key to discard the new setting and return to the Sound
menu.
Voice Launch
To set the key or action that launches VoiceSignal, do the following:
1. In standby mode, press the MENU key ( ), then press (for Voice
SVC), (for Voice Settings), and for Voice Launch. The
following options appear in the display:
• Key Only — Press and hold to activate VoiceSignal for one call.
• Key/EarMic — Attach a headset to your phone. Press and hold or press
and hold the button on the headset to activate VoiceSignal.
• Key/Flip — Press and hold to activate VoiceSignal for repeated calls.
Open and close folder to make and end calls using Voice Recognition. Press
to release VoiceSignal.
2. Use the navigation keys to highlight the option you want, then press the
key or the OK (left) soft key ( ) to save and exit. Press the
key to discard the new setting and return to the Voice Settings menu.
tuv
abc
ghi
CLR
tuv
abc
jkl
END
CLR