Filter
Top Products
88 2F. Voice Services
3.
Hold the phone so that the microphone is
approximately six inches away from your mouth
and you can clearly read the onscreen number
sequences.
4. Repeat either the digits or words shown onscreen
using a normal tone of voice.
Ⅲ If the phone cannot recognize your words, it will
continue to display the same information
onscreen.
5. Repeat the previous step for the remaining sets of
digits or words.
6. When you are finished with a full session, you will
reach a screen that reads, “
Adapting.”
7. Touch OK to save.
To reset the adaptation:
1. Press and touch Main () > Voice
Command.
– or –
Press and hold .
2. From the “Say a Command” page, touch Settings
> Adaptation > Reset Voice. (The phone displays a
reset voice dialog.)
3. Touch Yes to reset the voice recognition
parameters or
No to exit.
Using Choice Lists
If your phone is not confident it has recognized a name
or number correctly, it might display a choice list and
prompt you with “
Call?” followed by the first choice on
the list. To confirm the choice, say “
Yes,” or to hear the
next choice, say “
No.” You can also select the correct
choice by touching the associated onscreen option. To
cancel the command, say “
Cancel,” or to say the name
or number again, say “
Repeat.”
Note: It is recommended that you perform the complete
Adapt Voice session at least once to achieve the
maximum benefit of this feature. If a partial adaptation is
performed, you can always return later and resume the
process from the halfway point.
Main
M350.book Page 88 Monday, October 11, 2010 9:58 AM