Filter
Top Products
Using Voice-Activated Dialing
With your M1 from Sanyo,you can use a voice dial tag to automatically dial a
phone number in your Contacts.(A voice dial tag is a command you record
and use to place calls without using the keypad.) Your phone can store up to
30 voice dial tags.
Making a Call Using Voice-Activated Dialing
To use a voice dial tag to call a phone number:
1. Press and hold or .
2. Follow the voice prompts and recite the entry’s voice dial tag into your
phone’s microphone.
Programming Voice Dial Tags
To program a voice dial tag:
1. Display a Contacts entry.
2. Select a contact and press .
3. Select a phone number,and then select Options(right softkey) >
Set Voice Tag > Add.
4. After you are prompted to say the name you wish to program,wait for
the beep and then say the name into your phone’s microphone.
Tip:
Record voice dial tags in a quiet environment.
Note:
Please confirm that the Voice Prompt feature (see page 47) is set to On
before using the Voice-Activated Dialing so that you can hear the voice
instruction from the phone.The default setting is on.
120 Section 2H: Using Your Phone’s Voice Services