Filter
Top Products
Making a Ready Link Call by Entering a Number
To place a Ready Link call by entering a number:
1. From standby mode,enter the Ready Link number you want to dial.
2. Press to place the Ready Link call.Continue holding to
take the floor and speak.
Ⅲ
The contact’s name is displayed if there is a matched number in
your Ready Link List.
3. Continue with the Ready Link call,pressing and holding to
speak and releasing it to allow others to reply.
4. When the call is finished,press .
– or –
1. Press .
2. Select Go to(left softkey) > Enter R-Link#.
3. Enter the Ready Link number you want to dial.
4. Follow steps 2–4 above.
Note:
Ready Link numbers must contain 10 digits (area code + phone number)
or 11 digits (1 + area code + phone number).Your Ready Link number is
the same as your wireless phone number.
Tip:
The phone beeps if you press the Ready Link button when another party
has the floor.
You can also make a Group Call after checking the group member.Select
MENU to display group members,highlight <Call Group> and press
and hold the Ready Link button during step 3 on the previous page.
To redial your last Ready Link call,highlight Redial and press the Ready
Link button from the Ready Link List.
168 Section 2J: Using Ready Link