Filter
Top Products
Receiving a Ready Link Call
To receive a Ready Link call:
1. Make sure your phone’s Ready Link mode is enabled.(See “Setting
Ready Link Mode” on page 163.)
2. When you receive a Ready Link call from a contact,“R-Link Call,” the
contact’s name,and the Ready Link number are displayed.(You do
not need to take any action to answer the call.)
Ⅲ
When you receive a group call,“Group Call,” the group
member’s name,and the Ready Link number are displayed.
3. If the person placing the call has kept the floor (held the Ready
Link/Recorder button),you will see the contact’s name and Ready
Link number along with “has floor,” and you will hear the caller
speaking.
4. When the caller finishes speaking and releases , you will see
“Floor is open” on the display screen. Press and hold to take
the floor and reply to the caller.(You will see “You have floor” and hear
a tone confirming that you may speak.)
5. When the conversation is finished,press .
Note:
You can change the volume and the speaker setting while a Ready Link
call is activated.Volume: Adjust the voice volume by using the Side
Volume key or by pressing the navigation key up or down (except when
you are pressing and holding the Ready Link button).Speaker: Switch
the speaker on or off by pressing the Speaker button.
Tip:
You can also receive a Ready Link call with the phone closed.Press and
hold the Ready Link button to take the floor when the floor is open.
170 Section 2J: Using Ready Link