Sharp STX-2 Cell Phone User Manual


 
19
19
USING THE microSD CARD
REMOVING THE AT&T SIM CARD
1.
Make sure that your device is turned off, and then remove the back
cover.
2.
Lift the battery out of the device.
3.
Press down the tab in front of the SIM card slot opening with your
finger.
4.
Slide the SIM card out from the slot with your
finger. And slide tab.
INSERTING THE microSD CARD
The microSD card stores sounds, images, photos and videos, music, and
other files. To install your microSD card:
1.
Make sure that your device is turned off, and then remove the back
cover.
2.
Locate the microSD card slot on the upper part of the exposed right
panel.
3.
Insert the microSD card into the slot with
its gold contacts facing down until it clicks
into place.
4.
Replace the back cover.