Geotagging
Tag photos with details of where you took them.
On
When geotagging is turned on, the approximate geographical location is added to photos when you
take them. To use geotagging, you must enable location features from the Settings menu. For
geotags to be added to a photo, the location must be determined before you take the photo. Your
location is determined when appears on the camera screen. When your device is searching for
your position, appears.
Off
When geotagging is turned off, you cannot view the location where you took a photo.
Preview
You can choose to preview the photo just after you have taken or the video you have
recorded.
Unlimited
The preview of the photo or video appears after you have taken.
5 seconds
The preview of the photo or video apears for 5 seconds after you have taken.
3 seconds
The preview of the photo or video appears for 3 seconds after you have taken.
Off
The photo or video has been saved after you have taken, no preview appears.
This setting is only available in Normal capturing mode.
Auto upload
Automatically upload updates to photos to a pre-selected social networking service
(SNS).
Touch capture
Identify a particular focus area by touching the camera screen with your finger. The
photo is taken as soon as you release your finger. This setting is only available when
focus mode is set to touch focus.
On
Off
Shutter sound
Choose to turn on or turn off the shutter sound when you record a video.
Using the video camera
To record a video using the camera key
1
Activate the camera.
2
To start recording a video, press the camera key.
3
To stop recording, press the camera key again.
Shoot your videos in landscape orientation to get the best results.
72
This is an Internet version of this publication. © Print only for private use.