Filter
Top Products
This is the Internet version of the user's guide. © Print only for private use.
10
Basics
Getting started
Assembling the phone
Before you can use your phone you need to:
• Insert the SIM card.
• Attach and charge the battery.
SIM card
When you register as a subscriber with your network operator,
you get a SIM (Subscriber Identity Module) card. The SIM card
contains a computer chip that keeps track of your phone number,
the services included in your subscription, and names and
numbers in your contacts, among other things.
Note: If you have been using a SIM card in another phone, make
sure that your information is saved to the SIM card before you
remove it from the other phone. For example, contacts may
have been saved in the phone memory.
SIM card and battery information
Always turn off the phone and detach the charger before you
insert or remove a SIM card.
Note: It may take up to 30 minutes before the battery icon
appears when charging.
To insert SIM card and battery
1. Remove the battery cover by sliding the two catches on the
side of the phone and lifting it away as shown in the picture.
2. Slide the SIM card into its holder. Make sure that the gold
contacts of the SIM card are facing down, and the cut off
corner is correctly aligned.
3. Place the battery on the back of the phone with the label
side up and the connectors facing each other.
4. Place the battery cover as shown in the picture and slide
the two catches back into place.