Filter
Top Products
This is the Internet version of the user's guide. © Print only for private use.
27
Basics
Calling your voicemail service
You can easily call your voicemail service by pressing and
holding . If you have not set your voicemail number, you
will be asked if you want to enter the number. } Yes to enter
the number. You get the number from your network operator.
To enter your voicemail number
} Messaging } Settings } Voicemail number.
Voice control
With your phone, you can use your voice to:
• Voice dial – call someone by saying the name.
• Activate voice control by saying a “magic word”.
• Answer and reject calls when using a handsfree kit.
Voice commands can only be saved in the internal phone memory,
not on the SIM card. When recording, make sure that you are in
a quiet environment and try to use names that are distinct from
each other, %29 Tips when recording and using voice
commands.
Voice dialling
You can voice dial by saying a pre-recorded voice command.
Start voice dialling from standby using the phone, a portable
handsfree, a Bluetooth headset or by saying your magic word.
You must first activate the voice dialling function and record your
voice commands. An icon appears next to a phone number that
has a voice command.
To activate voice dialling and record names
1. } Settings } the General tab } Voice control
} Voice dialling } Activate } New voice } Add
and select a contact.
2. If the contact has more than one number, use and
to view the numbers. Select the phone number to which you
want to add the voice command. Now you are going to record
a voice command such as “John mobile” for the phone number
you selected.
3. Instructions appear. Wait for the tone and say the command
that you want to record. The voice command is played back
to you.
4. If the recording sounds ok } Yes. If not } No and repeat
step 3.
5. To record another voice command for a contact } New voice
} Add again and repeat steps 2-4 above.
To make a call from the phone
1. From standby, press and hold one of the volume buttons.
2. Wait for the tone and say the name you recorded earlier, for
example “John mobile”. The name is played back to you and
the call is connected.