Filter
Top Products
WALL MOUNTING
This phone can be mounted on a wall phone plate. If you do
not have a modular wall phone plate installed, please consult
with your phone company or installer to get one, or see the
following for installation without a wall plate.
1. Use the SHORT STRAIGHT WALL CORD, and plug one end into
the rear of the phone.
2. Plug the other end into the WALL JACK.
3. Put the phone over the WALL PLATE, make sure both posts fit
into slots on the back of the phone. Then slide down to lock the
phone into the WALL PLATE.
WALL MOUNTING WITHOUT A MODULAR WALL PHONE
PLATE
Follow these instructions to mount the
phone on the wall without a wall plate:
1. Locate a wall stud. If it is possible to uti-
lize a wall stud for mounting, dry wall
expanders or a similar type fastener is
recommended. Consult your local hard-
ware store for details.
2. Drill 2 holes 3-15 / 16 " (100 mm) apart.
3. Put a screw into each hole and leave 3/16"
(5mm) of the head exposed to mount the
phone, (screws are not included).
4. Connect the straight long cord to the phone and jack.
5. Place the TELEPHONE BASE on the 2 mounting screws and
gently push down to lock into place.
IMPORTANT
Before mounting the phone onto the wall, select a wall area
with sufficient strength. If mounting on the wallboard or in an
area of questionable strength, locate a stud for maximum
support of your telephone.
12