Filter
Top Products
Step 3: Setting up the Telephone
SETTING UP LANGUAGE, AREA CODE, TIME AND DATE
You may need to set up the language, area code, time and
date for your telephone when you install the batteries for the
first time or when you move to an area that has a different
area code. This is necessary because the phone must dis-
tinguish local or long distance calls to properly dial calls from
the Call Display list.
NOTE: During setup, if you do not press the DELETE button within
20 seconds, the display will return to normal display mode.
Press and hold the DELETE button, then press the DOWN
button, the following will show in the display:
The default language "
EE
" (English) will flash. Press the UP or
DOWN button to choose your desired language (flashing).
Press the DELETE button to confirm and accept. Then LCD
CONTRAST (5-grey level) will show on the display. Use the
UP or DOWN button to select the suitable grey-level and
press the DELETE button to accept.
To program your Area Code:
While the first digit is flashing, you should:
1. Press the UP button until the first digit of your area code is dis-
played (flashing).
2. Press the DELETE button to accept and go to the next digit.
3. Repeat steps 1 and 2 above to set the 2nd and 3rd digits of your
area code.
4
SET LANGUAGE
ESF
LCD CONTRAST
1 2 3 4 5
SET AREA CODE
007
SET AREA CODE
017
SET AREA CODE
817
Press UP & DELETE Press UP & DELETE Press UP & DELETE
“E” = English
“F” = French
“S” = Spanish