Filter
Top Products
MEMORY DIALING
You can quickly dial the numbers you stored into the 3 one-
touch speed dial buttons or 10 two-touch speed dial memories.
Storing Phone Number into Memory
1. Press the STORE button.
PPrroo
(short for programming) appears on
the display.
2. Dial the phone number you want to store. You can store up to 22
digits, including a TONE ( ) and a PAUSE (REDIAL), each of
which is counted as one digit.
The stored number and the location will show in the display.
4. Press the STORE button, or wait 3 seconds to resume normal
display.
5. Repeat steps 1-4 to store numbers into other memory locations.
NOTE: When the batteries are dead or removed for more than 5 min-
utes, the stored numbers may be erased.
TIP: If you entered a wrong number, you may press the STORE
button, then start from the beginning.
TO STORE A NUMBER TO BE DIALED VIA PRIVATE
BRANCH EXCHANGE (PBX)
Before entering a phone number in Step 2 in Storing phone
number into memory, do as follows:
1. Enter the outside line access digit (e.g., 9).
2. Press the REDIAL button (for a pause).
TO CHANGE A STORED NUMBER
Just store a new number, as described above, the old one
will be erased automatically.
7
3. For one-touch dialing:
Press one of the 3 one-
touch speed dial but-
tons (M1 to M3).
For two-touch dialing:
Press the MEMO button, and the
press one of the dialing keys (0 to 9)
to store a phone number in.