Filter
Top Products
15
PROBLEMS
The Call Display dis-
play does not show
the caller’s informa-
tion
Static noise on line,
cannot hear calling
party or calling party
can not hear you
Redial does not work
Line error shows in
the display
CHECK
The Call Display unit will not function until
you have subscribed to Call Display serv-
ice from your local telephone company.
Call your local telephone company to have
Call Display service installed on your
phone line. Also, fresh batteries must be
installed. Make sure all your phone line
connections are secure and correct. If it is
a private call or a blocked call, the caller’s
name and/or phone number will not
appear on the display. (You will see time
and date of call plus some dashes or the
words "UNAVAILABLE" or "PRIVATE
CALL".)
Make sure the HANDSET CORD is con-
nected properly, or replace the COILED
HANDSET CORD. Any phone store has
these cords in different lengths. After
some time the cord may become over-
stretched or damaged.
Check if
PP
shows in the display. Since the
REDIAL button has combined function
(pause), the phone may have been
paused. Just press the HOOK switch to
get a new dial tone.
You picked up the phone before the sec-
ond ring, or your phone received no
information or unclear information. Static
can cause this message. If this condition
persists, contact your local telephone
company to ensure there is no problem
with your phone line.