Filter
Top Products
3. Replace the battery door and snap it shut (Fig. 2).
CAUTION
Make sure that the telephone line cord is disconnected
before opening the battery door.
Replace the batteries when the LOW BATTERY INDICATOR
appears in the display or when the display gets dim.
‹ When the batteries are dead, the display will not show. You
can still make or receive calls, but you cannot use the Call
Display or memory dialing.
‹ When the batteries are dead, your call data and memories
could be erased.
CONNECTING THE TELEPHONE
1. Connect the COILED HANDSET CORD
to the bottom of the handset and the bot-
tom of the base.
2. Connect the straight telephone line cord to
the LINE CORD jack and telephone outlet
on the wall .
3. Route the LINE CORD into the channel on
the bottom of the base.
(For instructions on how to mount the telephone on the wall,
see page 12.)
3
LOW