Filter
Top Products
CallingCALLING
RECEIVING A CALL
1) When someone calls your MiniCel,
the LCD backlight flashes,
the alert sounds (see page 13) or
vibrates (see page 18) and
INCOMING CALL appears.
2) If the "any key" feature (page 19) is active, press any key
other than ▲ or ▼.
If you have disabled the "any key" feature, press
send
.
3) The backlight stops flashing
and the icon appears in
the display.
4) When you finish your call, press
end
.
▼
Absent Call Counter
When you don't answer an
incoming call, the display shows
the number of unanswered call(s).
Press any key to erase the message.
MAKING A CALL
▼
Direct Dialing
1) Enter the phone number on
the keypad. To erase a digit,
press
clear
and reenter the
correct number. To erase all
the digits, press and hold
clear
.
2) Press
send
.
The icon shows in the display
while a call is in progress. If the
"current call timer" feature is on,
the counter starts (see page 27).
7
CALLING
WITH YOUR MINICEL
SPEED
DIAL
Press
mem
, the two-digit
memory location
number (01-50)
and
send
.
Or, press
mem
, the
one-digit number for 1
through 9, and
send
.
SUPER
SPEED
DIAL
From the standby
display, press and hold
the one-digit number
(only for locations
1 through 8).
Caution: location 9 is for
emergency dialing only.
CALLING