Filter
Top Products
Memory ProgrammingMEMORY PROGRAMMING
STORING NUMBERS AND NAMES
The MiniCel has 50 memory locations (01 through 50).
You can also store a 10-digit description or name to
identify the phone number. There are three sources to
enter numbers into memory: the scratch pad, entered in
standby or the recall numbers list.
1) With the number in the display,
press and hold
mem
for one second.
2) Enter the location number where you want to store
the number. Example: location 01
To search for an empty location, press either ▲ or ▼.
At the empty location, press
mem
.
If all the locations are full, the MEMORY FULL message
appears and an error tone sounds.
If the location is occupied,
you will be prompted:
Example: you want to replace the number in memory,
press ▲ for yes.
3) If you want, you can enter a
10-character name with the
keypad. Example: HOME
4) To store the name or to finish,
press
mem
. You will see:
After two seconds, the display
returns to standby.
CHECKING MEMORY STATUS
From the standby display,
press
mem
three times.
To return to the standby display,
press either
mem
,
end
or
clear
.
10
MEMORY
PROGRAMMING FOR YOUR PHONE
HINT
To exit memory mode,
press
end
or
clear
.