Filter
Top Products
▼
PIN Calling Menu
To change the PIN:
1) To go to the security menu from
standby, press
menu
.
2) Press ▼ three times.
3) Press
menu
.
4) Press ▼.
5) Press
menu
.
6) Press
menu
.
7) Enter your password. The factory
pre-set password is 0123.
8) Enter the new PIN. The factory
pre-set PIN is 0000.
9) Press
menu
again.
In two seconds, the display returns to standby.
To Turn On or Off the PIN:
1) Follow steps 1 through 4 above.
2) Press ▼.
3) Press
menu
.
4) Use the ▼ or ▲ keys to choose between on or off.
5) Press
menu
again.
In two seconds, the display returns to standby.
26
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
HINT
To exit menu mode,
press
end
or
clear
.