Filter
Top Products
▼
Using the Scratch Pad
Use the scratch pad to record a phone number during a
call. Then you can dial that number from the scratch pad
or enter it into a memory location.
1) During a call, enter the
number with the keypad.
2) When you are finished with
your call, press
end
.
3) To dial the number in the
scratch pad, press
send
.
▼
Mute
•
If you want to mute the microphone so the caller
cannot hear, press
menu
and .
• To turn the microphone back on, press
menu
and
again.
▼
Monitor
During monitor, you hear the conversation from the
speaker on the back. The microphone is disabled. Use
this feature for calling a bank or similar automated
answering system.
•
To enable the monitor feature, press (monitor).
•
To disable the monitor feature, press (monitor).
▼
Transmitting DTMF Signal(s)
DTMF (dual tone multi-frequency) tones are transmitted
from your phone when you press a digit key during a call.
▼
Flash Signal (Signaling Tone)
When you press
send
during a call, it generates a flash
signal (signaling tone).
9
CALLING
NOTE
Since the microphone
(on the front) is disabled
during monitor, the
caller can’t hear you.