Filter
Top Products
120
SETTINGS & TOOLS
NOTES
If the handset is closed while displaying the G’zGEAR™ tool on
the main display, the tool will be displayed on the front display.
On the front display, the following information is displayed for
each tool:
Earth Compass: Compass
Walking Counter: Steps, burned calories
Thermometer: Temperature in Celsius and Fahrenheit
Tides: Time of flood tide, time of ebb tide
Sunrise Sunset: Time of sunrise, time of sunset
Astro Calendar: Phase of the moon
G’zGEAR™ automatically ends after 40 seconds of inactivity with
the flip closed.
•
•
•
Set Up
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Tools, G’zGEAR, Set Up.
2. Select one of the following options:
G_Switch: Enables switching of tools by shaking the handset
to the left with the flip open. See page 35 for information on the
Motion Detection function. (On/Off)
Save Last Mode: Displays the previously displayed mode when
starting a tool. (On/Off)
Backlight: Keeps the display backlight on while G’zGEAR™ is
active. (On/Off)
Pedometer: Counts your steps with the pedometer. (On/Off)
Calibration: Calibrates the electronic compass.
Restore Defaults: Returns G’zGEAR™ settings to initial value.