Filter
Top Products
131
SETTINGS & TOOLS
3. Select Tone/Vibrate/Reminder, then press the Center Select Key
[OK].
Tone: Select a ringer, then press the Center Select Key [SET]. To
play the alert tone, press the Left Soft Key [Play].
Vibrate: Select On or Off, then press the Center Select Key [SET].
Reminder: Select Once/Every 2 Minutes/Every 15 Minutes/Off,
then press the Center Select Key [SET].
NOTES
Emergency Tone has the following settings: Alert/Vibrate/Off.
PTT Alert has only two settings: Tone/Vibrate.
•
•
Keypad Volume
To set the keypad volume:
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Sounds Settings, Keypad Volume.
2. Adjust the volume by pressing the Directional Key " up or down,
then press the Center Select Key [SET] to save the setting.
Digit Dial Readout
To set whether to read out the numbers being entered when dialing a
phone number:
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Sounds Settings, Digit Dial Readout.
2. Select On or Off, then press the Center Select Key [SET].
Service Alerts
To set any of the three Alert options to either On or Off:
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press