A SERVICE OF

logo

Configuring PAD/ATPAD Ports 13
PAD Port Configuration
PAD Prompt Entry Number
Range: 0 to 8
Default: 0
Description: Specifies the customized prompt from the PAD Prompt Table.
This parameter is ignored when Terminal Control = PASS and the
PAD Prompt Entry Number is taken from the NUI/Password Table
entry.
Remote PAD Parameters Number
Range: 0 to 6
Default: 0
Description: Specifies the Remote PAD Parameter Table entry number that is
used by the remote PAD to update its X.3 characteristics when
connected to this port.
Note
No updates will be sent if this parameter is set to zero (0).
Autocall Mnemonic
Range: 0 to 8 alphanumeric characters
Default: N/A
Description: The mnemonic name that is used when the port is configured for
autocalling.
A corresponding entry must be made in the Mnemonic Table.
Use summing to combine several parameter values.
Autocall Timeout (sec)
Range: 5 to 255
Default: 10
Description: Specifies the time (in seconds) between call attempts when
autocalling.