A SERVICE OF

logo

274
Programming Commands
NRPOS Normalized Reference Position
NRPOS
Normalized Reference Position
Syntax
The preset value is 10.
Legacy Products
8560 series
Description
The NRPOS command adjusts the normalized reference-position that corresponds to the position on the
graticule where the difference between the measured and calibrated traces reside. The dB value of the
normalized reference position is equal to the normalized reference level. The normalized reference
position can be adjusted between 0.0 and 10.0, corresponding to the bottom and top graticule lines,
respectively.
NRPOS
S
P
UP
S
P
DN
?
number
OA
LF
CR
SP
,
;