A SERVICE OF

logo

85
Programming Commands
ACPBRPER Adjacent Channel Power Burst Period
ACPBRPER
Adjacent Channel Power Burst Period
Syntax
Legacy Products
8560 series
Description
The ACPBRPER command sets the cycle time (period) of the burst RF signal. The cycle time is needed
to set the sweep times when using the peak, two bandwidth, burst power, and gated methods for adjacent
channel power measurements.
NOTE The N9061A application supports the ACP measurement using the ANALOG
method only and therefore, although the user can set ACPBRPER, it does not do
anything when in RLC mode.
ACPBRPER
S
P
S
MS
US
SC
?
real
LF
CR
SP
,
;