A SERVICE OF

logo

Open as PDF
next previous
332
Programming Commands
TDF Trace Data Format
TDF
Trace Data Format
Syntax
The preset value for TDF is P.
Legacy Products
8560 series, 8566A/B, 8568A/B
Description
Formats trace information for return to the controller.
The different trace data formats are as follows:
• M selects the ASCII data format.
• P selects parameter data format. Numbers are in Hz, Volts, Watts, dBm, dBmV, DBuV, DBV.
• Specifying A returns data as an A-block data field. The MDS command determines whether data
comprises one or two 8-bit bytes. (See MDS (page 234))
• Specifying I returns data as an I-block data field. The MDS command determines whether data
comprises one or two 8-bit bytes. (See MDS (page 234))
• B selects binary data format. The MDS command determines whether data comprises one or two
8-bit bytes
TDF P
S
P
A
I
M
B
?
;
LF
CR
SP
,