148
Dukane Manual Part No. 403–566–01
DPC
™
II Plus and EZ Welder System – User’s Manual
Dimensions
Operating Environment
Operate the DPC II Plus within these guidelines:
Temperature: 40°F to 100°F (+5°C to +38°C)
Pressure: Ambient
Air Particulates: Keep the DPC dry.
Minimize exposure to moisture,
dust, dirt,smoke and mold.
Humidity: 5% to 95% Non–condensing
@ 0°C to +30°C
Vibration: 1.0 G
Storage guidelines:
Temperature:-4°F to 158°F (-20°C to +70°C)
Humidity: 5% to 95% Non–condensing
@ 0°C to +30°C
Vibration: 2.5 G
23.78 in
604 mm
Cooling
Air Inlet
Cooling Fan
Allow 4 in (10 cm)
space for cables
Allow 2 in (5 cm)
space for ventilation
Heated
Exhaust Air
Allow 2 in (5 cm)
space for ventilation
Allow 4 in (10 cm)
space for cables
17.17 in
436 mm
5.12 in
130 mm
5.47 in
139 mm
Ꮨ
Ꮨ
ƽ
DUKANE CORP
ST. CHARLES, IL 60174
MADE IN USA
SERIAL NUMBER
US 10000
– WARNING! –
POWERLINE MUST BE GROUNDED
AT OUTLET
REMOVE ALL POWER BEFORE
REMOVING COVER OR CONNECTING
OR DISCONNECTING CABLES.
ULTRASOUND
OUTPUT
SYSTEM OUT
+
–
Power Monitor
Jacks
Power Signal
Output Module
Power
Signal
Output
Zero
Adjust
SYSTEM IN
J1
U.S.PATENT 4,277,710
– WARNING–
POWER LINE MUST BE
GROUNDED AT OUTLET
LINE VOLTAGE
200–240Vac 50/60Hz
15A
MODEL NUMBER
200-240 VAC, 50-60Hz, 15A
Multi–Probe Slave Module
Multi–Probe Master Module
Press Control Board
Power Signal Output
Figure 15–1 Generator 3–View and Dimensions
