Connecting to a Projector on a Network and Projecting
21
Presentation Mode
Each time this is clicked, Presentation mode switches between enabled/
disabled. s p.25
Projector control
While the projector is connected to the network, the projector's "AV
Mute", "Switch PC source" and "Switch video source" functions can be
controlled from the toolbar.
Click to display the following toolbar.
A/V Mute
The same function as the [A/V Mute] button on the remote
control. See the projector User’s Guide for more information.
Switch PC source
The input source alternates between computer input port and
EasyMP each time you click.
Switch video source
The input source alternates between S-Video input port and
Video input port each time you click. The projector does not
switch ports if the cable is not connected.
A/V Mute Switch PC source
Switch video source
Screen Preview
Displays the multi-screen preview screen.
Clicking causes a preview of the display with the settings you have
made to appear. Clicking each display causes each preview window to be
enlarged to full-screen.
Set options
Transmission performance during the transfer of computer images can
be adjusted. s p.47
Movie Sending Mode
Used to immediately play back a movie file. s p.26
Disconnect
Disconnects the connection to the projector.
Signal intensity
This is displayed when the connection is made in the "Quick Connection
mode". As the signal strength increases, so does the number of lit
indicators.
