A SERVICE OF

logo

Connecting to a Projector on a Network and Projecting
22
When The Target Projector is Not Found
Action 1. Restart the computer.
Action 2. Check if the projector network settings are set to "Quick
Connection Mode". See the projector User’s Guide for more
information.
Action 3. Check the following if actions 1 and 2 do not help. (If it is
disconnected, check the following.)
Switch toolbar display
You can switch the toolbar display as shown below. The toolbar display
you select remains in effect the next time you use EMP NS Connection.
Simple
Normal
Full
Is the indicator on the
wireless LAN unit
flashing?
Reinstall the wireless LAN
unit.
Are you using
commercially available
firewall software?
Create a firewall exception
for EMP NS Connection in
the firewall software you are
using.
Are any of the supplied
utilities operating from
the computer's wireless
LAN unit?
Close the utility and restart
EMP NS Connection.
Contact Epson as described in the
User’s Guide.
Not flashing
Flashing
Yes
No
Yes
No