EPSON Stylus Pro 7600/9600 Revision A
Adjustment Self-diagnostic Function 255
5.2.3.19 Test Pattern Printing
You can print adjustment patterns and check each adjustment item.
(See Figure 5-56)
Check Ptn.:
Prints all the adjustment patterns (including the adjustment variables list)
(Time required: about 20 minutes)
Check Ptn. 2:
Of the patterns to be output by “Check Ptn.”, the first pattern to the head gap
adjustment (Uni-D) pattern will be output.
(Time required: about 5 minutes)
Check Ptn. 3:
Of the patterns to be output by “Check Ptn.”, the Bi-D adjustment pattern to the
adjustment variables will be output.
(Time required: about 15 minutes)
Adj. Variable:
Outputs the list of the setting compensation values (variables) determined by various
adjustments.
Press the [Cleaning] key on a serial number input screen, and the display will
change to the next screen.
(For example, from “No.1: PEG**000000”, the display changes to “No.1:
PEG**000000”.)
Press the [Cleaning] key on the “Print Adj.Pattern” screen, and the display
will change to the serial number input screen “No.1: PEG**000000”.
Figure 5-56. Menu Transition for Test Pattern Printing
Print :
? Check Ptn.
?
Print :
? Adj.Variable ?
No.1 :
?PEG∗∗000000
No.2 :
?PEG01∗∗0000
No.3 :
? PEG0123∗∗00
[
Paper Feed
∆
]
[SelecType]
[Enter]
[Enter]
[Paper Feed
∆
]Key: +
[Paper Feed
∇
]Key : –
* Setting is possible in increments of 2 digits.
No.4 :
? PEG012345∗∗
Print Adj.Pattern
Printing Pattern
[Enter]
[Enter]
[Enter]
[
Paper Feed
∇
]
[Paper Feed
∆
]Key: +
[Paper Feed
∇
]Key : –
* Setting is possible in increments of 2 digits.
[Paper Feed
∆
]Key: +
[Paper Feed
∇
]Key : –
*2Setting is possible in increments of 2 digits.
[Paper Feed
∆
]Key: +
[Paper Feed
∇
]Key : –
* Setting is possible in increments of 2 digits.
After printing, the display changes to
[Clean Head].
[SelecType] Key
→ To "Printing Pattern"
Printing end→ To serial number input screen
Print :
? Check Ptn.
2 ?
[
Paper Feed
∆
] [
Paper Feed
∇
]
[SelecType] Key
→ To "Printing Pattern"
Printing end→ To serial number input screen
Print :
? Check Ptn.
3 ?
[
Paper Feed
∆
] [
Paper Feed
∇
]
[SelecType] Key
→ To "Printing Pattern"
Printing end→ To serial number input screen
[Enter] Adjust Print
[Enter]
