206 EpsonNet WebAssist
Remote Printer Mode
TCP/IP
IP Address Settings
Items Explanations
Primary Print Server
Name
Enter the primary print server name (up to 47
characters).
Printer Port Number Enter the printer port number (0 to 254).
Items Explanations
Method for Acquiring the
IP Address
Select a method for acquiring IP addresses. If
Auto is selected, DHCP becomes available.
To use the DHCP server, make sure it is installed
on your computer and correctly configured.
See your operating system’s online help for
detailed instructions.
To set the IP address manually, select Manual.
IP Address Enter an IP address for the print server. Be sure
the IP address does not conflict with any other
devices on the network.
Subnet Mask Set the subnet mask.
Default Gateway Set the gateway address if needed.
Set Using Automatic
Private IP Addressing
(APIPA)
Select Enable to get a private address
between 169.254.1.1 and 169.254.254.254
automatically when an IP address cannot be
obtained by the DHCP server; otherwise,
select Disable.
Set Using PING Enables or disables IP address setting using the
ping command.
