54 EpsonNet WinAssist Configuration Utility
Note:
❏ If you try to add an incorrect network address, the following message
appears: “The network address XXX.XXX.XXX.XXX that you
entered will be added to the list as XXX.XXX.XXX.X. Add this
address?” Check the correct network address and then click OK to
add it.
❏ If you try to add the same network address, the message “This
network address has already been registered” appears, which
indicates this address cannot be added.
Search Options-IPX
When you manage the print server with IPX (NetWare), and when
you want to configure the print server outside of the local
network, set the network address of the print server. Select
Refresh from the View menu or restart EpsonNet WinAssist for
the settings to take effect.
Note:
❏ To use this option, you need to log in to the NetWare server as a
supervisor.
❏ When using a dial-up network, delete any unnecessary addresses
from the Search Addresses list to prevent charges for any extra
accounts.
List box Displays network addresses and subnet masks that
have been registered.
Add button Registers a network address (up to 20 addresses).
Do not add the network address if it is in the same
segment.
Remove button Removes a network address and its subnet mask
from the List box.
