A SERVICE OF

logo

Transporting the Printer
If you need to transport your printer some distance, carefully
repack it as described below, using the original box and
packing materials.
1. Turn off the printer and remove any paper loaded in the
printer.
2. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer. If an
optional cut-sheet feeder is installed, remove it.
w
Warning:
If the printer has been used recently, the print head may be
hot. Let it cool before attempting to remove the ribbon
cartridge.
3. Remove the paper guide. Remove the ribbon cartridge as
described in steps 3 through 4 of “Replacing the Ribbon
Cartridge” on page 7-2. Then close the printer cover.
4. Repack the printer, ribbon cartridge, paper guide, and power
cord in the original packing materials and place them in the
printer’s original box.
L
Maple Rev.D
A5 size Chapter 7
97/06/17 pass 0
7-6
Maintenance and Transportation