2. Press the
Paper Select
button to select and make sure
the
# message appears on the control panel display.
3. Follow the instructions in “Loading continuous paper with
the tractor” on page 3-14.
c
Caution:
❑
Printing on the edge of continuous forms with labels can
damage the print head.
❑
When loading continuous forms with labels, make sure the
left edge of the form is no further than 3 cm to the left of
the arrow mark (when facing the back of the printer).
To tear off and eject continuous forms with labels
Always tear off and eject continuous forms with labels by
following the procedure below.
Note:
In
mode, the
Tear Off
button is disabled and the
Load /Eject
button only feeds forms forward.
1. At the back of your printer, tear off the last label form that
has entered the printer.
2. Press the
LF/FF
button to eject the last label form forward.
Me-bac
L
Maple Rev.D
A5 size Chapter 3
97/06/17 pass 0
3-32
Paper Handling
