Serial Interface Specifications
Synchronization: Asynchronous
Handshaking: Handshaking by DTR signal or XON/XOFF.
Signal level: EIA-232D
Mark logical “1” (
−
3 V to
−
25 V)
Space logical “0” (+3 V to +25 V)
Handshaking: Handshaking by DTR signal and XON/XOFF.
Baud rate: 300, 600, 1200, 2400, 4800, 9600, or 19200 bps
Connector plug: EIA 25-pin sub-miniature D-shell
connector (female)
Data format: 1 start bit
Data word length: 8 bits
Odd, even, or no parity
1 stop bit
Optional Cut-Sheet Feeder Specifications
The specifications below apply to the optional cut-sheet feeder (C80683 ).
Note:
You can load the same types of single sheets, single-sheet multi-part forms,
envelopes, and postcards in the cut-sheet feeder as you can load in the front or
rear paper guide. For paper specifications, see page A-4.
Capacity:
Single sheets
A3 size paper Up to 130 sheets of 82 g/m
2
(22 lb) paper
Up to 170 sheets of 64 g/m
2
(17 lb) paper
Other paper Up to 200 sheets of 82 g/m
2
(22 lb) paper
Up to 250 sheets of 64 g/m
2
(17 lb) paper
Single-sheet multi-part Up to 40 sheets of 47 g/m2 (12.5 lb) paper
forms
Envelopes Up to 20 plain or bond envelopes
Up to 30 airmail envelopes
Postcards Up to 50 plain paper cards
A
R
Maple Rev.D
A5 size Appendix A
06/17/97 pass 0
Specifications
A-19
