The cut-sheet feeder feeds more than one sheet at a time.
Cause What to do
You may have loaded too
many sheets in the bin.
Remove some sheets. See page A-19
for information on the types and
quantity of paper that can be loaded
with the cut-sheet feeder.
Sheets of paper are stuck
together.
Remove the paper stack, fan it, and
then reload it.
Paper feeding is crooked.
Cause What to do
The right and left paper
guides are too far apart.
Position the paper guides to match the
width of your paper.
The paper is old or creased. Use only new, clean sheets of paper.
You may not be using the
right type of paper for the
cut-sheet feeder. For example,
your paper may be too heavy
or too light.
Make sure your paper meets the
requirements of your printer and
cut-sheet feeder. See the paper
specifications and the optional
cut-sheet feeder specifications on page
A-19.
When the printer ejects the paper, the Paper Out flashes and
the Pause light comes on.
Cause What to do
The printer has not fully
ejected your paper.
Remove the paper by hand; the
Paper
Out
light goes out. Press the
Pause
button to resume printing.
L
Maple Rev.D
A5 size Chapter 8
06/17/97 pass 0
8-16
Troubleshooting
