10
Precautions
<Precautions on installation>
Do not install the unit in the following conditions.
- in a extremely hot or cold place
- in a moist place
- in a dusty place
- in a strong magnetic field or near a device which generates a magnetic field
- in the direct sunshine
<Precautions on safety>
• Be sure to connect the unit to the power supply specified in the specification section of this
manual.
If you use the unit in an area with a different power voltage, first consult your dealer or the
nearest Fostex service station.
• When you unplug the power cord from AC outlet or the unit, hold the plug, to avoid
possible electric shock.
• Do not plug or unplug the power cord from or to AC outlet or the unit while your hands are
wet to avoid possible electric shock.
• Plug the power cord firmly to AC outlet and the unit.
• It is very dangerous to use a power cord that is frayed or damaged. In such a case, stop
using the unit immediately and change the cord to a new one.
• If the unit is not going to be used for a long period of time, we recommend to disconnect
the power cord form AC outlet.
• Do not let water or other liquid, or metal objects such as pins, accidentally enter the inside
of the unit (especially the inside of the tray) because this may lead to electric shock or
damage. Should water enter the inside of the unit, remove the power cord from AC outlet,
and consult your dealer or the nearest Fostex service station.
• Do not drop or the unit or give a strong shock to the unit, which may lead to damage of the
internal circuits or FL display.
