2-10
34. [AUDIO EDIT] key
pressing this key while stopped enters the menu selection mode for audio editing. In
this mode, you can select the editing menu by pressing this key repeatedly or by
using the jog dial. See "Chapter 9: Audio file management" and "Chapter 10: Editing track
data" for details.
35. [SOURCE-IN] ([PREVIEW]/[TR 1]) key
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
• Displays time data stored in this key so that you can edit the data.
• Pressing this key after pressing the [STORE] key stores the holding time or edited
time to the SOURCE-IN point.
• When editing track data, this key selects track 1.
When SHIFTed:
• Pressing this key while stopped executes the fade-out preview at the SOURCE-IN
point.
36. [TC RDY] key
Only when the NEW FILE or INSERT mode is active, pressing this key arms or unarms
the time code track.
See "Chapter 5: Time code recording" for details.
37. [SLATE TONE] ([TONE REC]) key
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
• While pressing down this key, the 1-kHz slate tone is output from all the output
connectors at the reference level.
• During recording, the 1-kHz slate tone is recorded while pressing down this key.
When SHIFTed:
• During recording, pressing this key records the slate tone for the time set by the
"Tone Rec?" menu in the Setup mode, and then continues normal recording.
• When the INSERT mode is active, pressing this key while stopped records the slate
tone for the time set by the "Tone Rec?" menu in the Setup mode, and then stops.
38. [AUDIO RDY - INSERT] key
Pressing this key alternates on and off of the INSERT mode.
When the mode is active, you can turn on [TC RDY].
By recording to an existing file in the INSERT mode, you can replace the current
audio data with new one or add new audio data to the current one.
If you are going to make recording in the INSERT mode when there is no audio file,
the display shows "No Audio Files!".
See "Chapter 4: Audio recording/playback" for details about how to use this key.
39. [MUTE] ([MUTE REC]) key
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
• While holding down this key during playback, both the analog and digital outputs
except the PHONES output are muted.
• While holding down this key during recording, audio is muted and silence is
recorded.
When SHIFTed:
• During recording, pressing this key starts mute recording for the time set by the
"Mute Rec?" menu in the Setup mode, and then continues normal recording.
• When the INSERT mode is active, pressing this key while stopped starts mute
recording for the time set by the "Mute Rec?" menu in the Setup mode, and then
stops. See "Chapter 4: Audio recording/playback" for details about how to use this
key.
OUTIN
TR1
SOURCE
TR2
TC RDY
SLATE TONE
TONE REC
INSERT
MUTE
MUTE REC
AUDIO EDIT
