13-6
2. Press the [ENTER/YES] key.
If the [ENTER/YES] key is pressed, the section “192” starts flashing.
3. Move the cursor and change the Gateway.
Move the cursor by the [SKIP/CURSOR >>I] or [SKIP/CURSOR I<<] key and rotate the jog dial to
change the Gateway. The alphanumeric keys can be also used to change the Gateway.
4. Press the [ENTER/YES] key.
Pressing the [ENTER/YES] key defines the change on the Gateway.
Flashing
• Sub net
The Sub net mask value in the network DV40 exists should be set. In the case the Sub net
mask is not used, you do not have to set this value.
1. Rotate the jog dial to select “Subnet? [255.25” and press the [ENTER/YES] key.
To check the full digits of Sub net value, press the [SKIP/CURSOR >>I] key once. If you do so, the
following will appear on the DV40 FL display.
Now you can see that the current Subnet setting on DV40 is [255. 255. 255. 0].
2. Press the [ENTER/YES] key.
If the [ENTER/YES] key is pressed, the section “255” starts flashing.
3. Move the cursor and change the Sub net mask.
Move the cursor by the [SKIP/CURSOR >>I] or [SKIP/CURSOR I<<] key and rotate the jog dial to
change the Sub net value. The alphanumeric keys can be also used to change the Sub net value.
4. Press the [ENTER/YES] key.
Pressing the [ENTER/YES] key defines the change on the Sub net value.
Flashing
Flashing
• Login Name (Administrator)
Using the Login Name and the Password set in this menu, log in from a FTP client appli-
cation.
1. Rotate the jog dial to select “LoginName Admin?” and press the [ENTER/YES] key.
The first letter “d” of default login name “dv40” starts flashing.
Flashing
