17-4
9P-REMOTE/15P-REMOTE
• Connectors : D-sub 9-pin (9P-REMOTE)
D-sub 15-pin (15P-REMOTE)
• Protocol : RS-232C, conformed to the Sony 9-pin (P2) protocol
(The DV40 is a controlled device.)
* The 9P-REMOTE and 15P-REMOTE connectors are connected in parallel.
ETHERNET
• Connector : RJ-45
* Conformed to IEEE 802.3, 10BASE-T and 100BASE-TX standards.
<Recording/playback>
• Recording drives : E-IDE standard, DVD-RAM drive installed as a
standard.
2.5-inch hard disk drive also can be installed as an
option.
• Fs/quantization: : 44.1/48kHz 16bit
44.1/48/88.2/96/176.4/192kHz 24bit
• Recording/playback freq. range: 20Hz~20kHz +/-1dB (FS 44.1/48kHz)
20Hz~40kHz +/-2dB (FS 88.2/96kHz)
20Hz~80kHz +/-3dB (FS 176.4/192kHz)
• S/N ratio : 150 dB or more, 110 dB (typically)
• Dynamic range : 105 dB or more, 110 dB (typically)
• Pitch control : +/-6% in 0.1 % steps
• Crossfade : default: 10 msec.
• Locate memories : MEMORY points: 100, CUE points: 99
<General>
• External dimensions : 141 (H) x 482 (W) x 381 (D) mm
• Weight : Approx. 7.4kg
• Power requirement : 120VAC 60Hz, 230V~ 50/60Hz (AC inlet type)
• Power consumption : 50W
* Specifications and appearance are subject to change without notice for product improvement.
Pin No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Controller Out
DATA OUT
D-sub 9P
DATA IN
D-sub 15P
DATA IN
Frame Ground Frame Ground Frame Ground
Frame Ground Frame Ground Frame Ground
NC
NC
NC
NC
NC
+12V
Transmit A
Receive B
Receive Common
Spare
Transmit Common
Transmit B
Receive A
Transmit A
Receive B
Receive Common
Spare
Transmit Common
Transmit B
Receive A
Receive A
Transmit B
Transmit Common
Spare
Receive Common
Receive B
Transmit A
T
R
+
-
A
B
A and B are defined as shown below.
Use a straight type cable.
A<B -> “1” (Mark)
B<A -> “0” (Space)
