Troubleshooting 145
Server fault indications flowchart
Symptoms:
• Server boots, but a fault event is reported by Insight Management Agents (on
page 113
)
• Server boots, but the internal health LED or external health LED is red or
amber
NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
• System overtemperature condition
Item Refer to
1 "Management Agents (on page 113)" or in the HP ProLiant
Servers Troubleshooting Guide located on the Documentation
CD or on the HP website (http://www.hp.com/support
).
2 • "Integrated Management Log ("Power-on problems
flowchart" on page 136
)" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD
or on the HP website (http://www.hp.com/support
).
• "Event List Error Messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD
or on the HP website (http://www.hp.com/support
).
3 Server user guide, located on the Documentation CD, or the HP
website (http://www.hp.com/products/servers/platforms
)
4 System Management Homepage at https://localhost:2381
(https://localhost:2381)
5 "Power-On Problems ("Power-on problems flowchart" on page
136
)"
