A SERVICE OF

logo

148 HP ProLiant DL385 Server User Guide
POST error messages and beep codes
List of messages:
Introduction to POST error messages.........................................................................................148
Introduction to POST error messages
The error messages and codes in this section include all messages generated by
ProLiant servers. Some messages are informational only and do not indicate an
error. A server generates only the codes that are applicable to its configuration
and options.
The following POST messages are new. For a complete listing of error messages,
refer to the POST messages in the HP ProLiant Servers Troubleshooting Guide
located on the Documentation CD or on the HP website
(http://www.hp.com/support
).
WARNING: To avoid potential problems, ALWAYS read
the warnings and cautionary information in the server
documentation before removing, replacing, reseating, or modifying
system components.
Invalid memory types were found on the same node. Please check DIMM
compatibility. - Some DIMMs may not be used
Description: Invalid or mixed memory types were detected during POST.
Action: Use only supported DIMM pairs when populating memory sockets.
Refer to the applicable server user guide memory requirements.
Node Interleaving disabled - Invalid memory configuration
Description: Each node must have the same memory configuration to enable
interleaving.
Action: Populate each node with the same memory configuration and enable
interleaving in RBSU.