A SERVICE OF

logo

Page
15
Engineering - Video - General
The ‘Power on Default’ button sets the hardware on the card to the current settings. This
is only relevant to cards containing OmniGen functionality.
The Output Control and Panning control sections adjust the generated signal within the
OmniGen module, and are described within the OmniGen User Manual.
OmniGen contains a simple character generator. This can either display a fixed string, or
can display timecode or PC time.
The ‘Use blanking and ancillary data’ section is only present with the ‘Advanced Option’.
The blanking and ancillary data is normally generated by the OmniGen module. However
if you are playing out a full raster file, and wish to use the ancillary data from within that
file, then you must select ‘From Source Image’.