November 28, 2011
7038-159D
Page 25
5700 Step Top Wood Stove Series ACC
E. Tube Channel Assembly Replacement
Removing Tube Channel Assembly
1. Remove the right side bricks (5 pieces) and right hand
rear brick.
2. Remove the 2 brick retainers by sliding back and then
up.
3. Remove the baffl e protection channel by rolling forward
and out of the fi rebox.
4. Locate the 2 channel nuts and 1 bolt inside of chamber
and remove using a 7/16 socket wrench.
NOTE: Soak the bolts with penetrating oil for at least 15 min-
utes before trying to remove them.
Figure 25.1
5. Slide the tube channel assembly all the way to left until
it is off the threads. Drop the right side down, then slide
the assembly back to right.
6. The ceramic blanket and both baffl e boards can be
removed at the same time you remove the tube channel
assembly.
7. When the tube channel assembly is free of the left side
support, rotate clockwise and pull assembly, blanket and
baffl es out through the front opening.
8. Re-install in reverse order.
4
1
1
1
1
6
Baffle Boards
Ceramic Blanket
Baffle Protection Channel
Brick Retainers
Right Side
Rear Brick
Side Brick
Tube Channel Assembly
Tube Channel Nuts
Bolt
1
2
4
3
Rotate and
remove from
firebox
