6.3.4 Interface Specifications (GT02L)
Interface for connecting PLC/External devices
- COM port
Item
Communication standard Conforms to RS232C
(Non insulation type)
Conforms to RS422
(Non insulation type)
Communication
condition with
external
devices
9600, 19200, 38400, 57600, 115200 bps
Data length (bit) 7, 8
Parity None, Odd, Even
Transmission distance
(Total length)
Max. 15 m
(Baud rate: 19200 bit/s)
Max. 500 m
(Baud rate: 115200 bit/s)
Terminal resistance value
－
Ω
Protocol - MEWTOCOL (Protocol for PANASONIC PLC: FP series)
- General-purpose serial (PANASONIC dedicated protocol)
- Protocol for other companies' PLCs
(For the details, refer to the latest GTWIN HELP.)
Connector terminal base (8-pin)
Note1) 2) 3)
Note1) The (+) and (-) terminals are the power supply terminals for driving the main unit.
Note2) Regarding power supply voltage, please pay due consideration to the cable length so that the
applied voltage is within the operation voltage range.
Note3) When tightening the terminal block requiers a flat-blade screwdriver with a blade size of 0.4 x 2.5
or special screwdriver (part No.: AFP0806). Set the tightening torque between 0.22 Nm to 0.25
Nm.
Applicable wire
Nominal cross-sectional area
AWG#28 to 16 0.08 to 1.25mm
Interface for transferring screen data
- USB port
Communication standard USB1.1
Note1)
USB MiniB type 5pin (Male)
Trasmission distance Max. 5 m
No. of connected unit with PC 1 unit
Note1) Take care of handling of the connector not to add an excessive static electricy on the metal part
of the connector.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
