6.6.4 Interface Specifications (GT12)
Interface for connecting PLC/External devices
- COM port
Item
AIG12*Q12D
AIG12*Q14D
Communication standard Conforms to RS232C
(Non insulation type)
Note1)
Conforms to RS422
(Non insulation type)
Note1)
condition with
external
devices
Baud rate (bit/s) 9600, 19200, 38400, 57600, 115200 bps
Stop bit (bit) 1
Transmission distance
(Total length)
Max. 15 m
(Baud rate: 19200 bit/s)
Max. 500 m
(Baud rate: 115200 bit/s)
Protocol
- MEWTOCOL (Protocol for PANASONIC PLC: FP series)
- General-purpose serial (PANASONIC dedicated protocol)
- Other companies' PLC protocols (For the details, refer to the latest
Connector terminal base (8-pin)
Note2) 3)
Note1) It is internally isolated from the input power supply side (between +24V and 0V).
Note2) The (+) and (-) terminals are the power supply terminals for driving the main unit.
Note3) Regarding power supply voltage, please pay due consideration to the cable length so that the
applied voltage is within the operation voltage range.
Interface for transferring screen data
- USB port
Communication standard USB1.1
Note1)
USB MiniB type 5pin (Male)
Trasmission distance Max. 5 m
No. of connected unit with PC
Note1) Take care of handling of the connector not to add an excessive static electricy on the metal part
of the connector.
SD memory card slot (For GT12M1/GT12G1 only)
Support media SD memory card , SDHC memory card
Supported format standard
Note2)
Note1) The manufacturer name that the operation check has done: Panasonic Corporation
Usable capacity of a SD memory card varies according to the version of GT firmware.
Note2) Please format with a format software for SD memory cards.
Note3) The SD access lamp turns on while acccessing the SD memory card.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
