3. Telephone
26
3.7.2 Into the one-touch dial
1
Press {CALLER ID}.
2 Press {A} or {B} repeatedly to display the desired
item.
3 Press {MENU}.
4 Select a station key.
For station 1–3:
Press the desired station key, press {A} or {B}
repeatedly to select “DIAL MODE”, then press
{SET}.
For stations 4–5:
Press the desired station key.
For stations 6–10:
Press {LOWER}, then press the desired station key.
L If you do not need to edit the name, skip to step
6.
5 If a name is required, enter up to 16 characters for
the name (page 18).
6 Press {SET}.
L If the number requires editing, see page 24.
7 Press {SET}.
Note:
L You can confirm the stored items in the one-touch
dial by printing the telephone number list (page 63).
L To edit a name, see page 22.
L If caller information does not include the caller’s
name, enter the name manually. See the instructions
on page 22.
L If you assign an item to a station key which already
contains an item, the previous item will be replaced.
L Station 1 to 3 can be used alternatively as broadcast
keys (page 29).
{SET}
{A}{B}Station keys
{LOWER}
{MENU}
{CALLER ID}
FL313HK-PFQX2630ZA-en.book Page 26 Tuesday, August 29, 2006 10:19 AM
