4. Fax
33
4.6 Receiving a fax automatically
– Auto answer ON
4.6.1 Activating FAX ONLY mode
Press {AUTO ANSWER} repeatedly to display the
following.
FAX ONLY MODE
L The {AUTO ANSWER} indicator is ON.
How faxes are received
When receiving calls, the unit will automatically answer
all calls and only receive fax documents.
Note:
L The number of rings before a call is answered in FAX
ONLY mode can be changed (feature #06 on page
41).
4.7 Receiving a fax manually –
Auto answer OFF
4.7.1 Activating TEL mode
1
Make sure feature #73 is set to “TEL” beforehand
(page 44).
2 Press {AUTO ANSWER} repeatedly to display the
following.
TEL MODE
L The {AUTO ANSWER} indicator is OFF.
How to receive phone calls and faxes
1. Lift the handset to answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {START}.
CONNECTING.....
3. Replace the handset.
L The unit will start fax reception.
L If you do not answer the call within 15 rings, the
unit will temporarily switch to fax reception. The
other party can then send a fax.
{START}
{STOP}
FL313HK-PFQX2630ZA-en.book Page 33 Tuesday, August 29, 2006 10:19 AM
