7. Programmable Features
45
Setting the connecting
tone
{#}{7}{6}
If you often have trouble when sending faxes, this feature allows you to
hear connecting tones: fax tone, ring back tone and busy tone. You can use
these tones to confirm the status of the other party’s machine.
{1} “ON” (default): You will hear connecting tones.
{2} “OFF”: Deactivates this feature.
L If the ring back tone continues, the other party’s machine may not be a
fax machine or may have run out of paper. Check with the other party.
L The connecting tone volume cannot be adjusted.
Changing the TEL/FAX
delayed ring setting
{#}{7}{8}
If you use an extension telephone when this unit is in TEL/FAX mode,
select the desired number of times the extension telephone rings before
the unit answers the call.
{1} “1”
{2} “2” (default)
{3} “3”
{4} “4”
{5} “5”
{6} “6”
{7} “7”
{8} “8”
{9} “9”
Note:
L See page 34 for details.
Setting toner save feature
{#}{7}{9}
{1} “ON”: The toner cartridge will last longer.
{2} “OFF” (default): Deactivates this feature.
Note:
L This feature may lower the print quality by reducing toner consumption.
Resetting advanced
features to their default
settings
{#}{8}{0}
{1} “YES”
{2} “NO” (default)
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {1} to select “YES”.
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
Feature/Code Selection
FL313HK-PFQX2630ZA-en.book Page 45 Tuesday, August 29, 2006 10:19 AM
